![MIVALT s.r.o.](/img/default-banner.jpg)
- 58
- 207 506
MIVALT s.r.o.
Czechia
Приєднався 4 лип 2008
MP-DW dewatering machines videos, www.mivalt.eu
Screw press dewatering municipal sludge
MP-DW-201 with 8m screw conveyor MP-SC-8 and automatic polymer station ASP220/110-SS-C, dewatering municipal sludge from local WWTP.
Переглядів: 268
Відео
Belt filter solids separation
Переглядів 2292 місяці тому
2 m3/h with dosing 0.1% cationic polymer solution on separation of suspended solids on fish farm.
Cheese production DAF sludge dewatering on screw press
Переглядів 1013 місяці тому
MIVALT MP-DW-201 dewatering multi disc screw press dewatering DAF sludge on cheese production facility. Cake TSS 21-23%.
Dewatering plastic recycling DAF sludge with screw separator MP-SS-300
Переглядів 1297 місяців тому
Dewatering of DAF sludge (approx 4-5% at 5.0 m3/h) through wedge wire screw separator MP-SS-300. Sludge contains high fiber and paper content. Using cationic polymer at 250 l/h@0.2% solution.
MP-DW-201 dewatering fish farm DAF sludge
Переглядів 1327 місяців тому
Dewatering DAF sludge from fish farm, high F&G content.
Distillery secondary sludge dewatering - MP-DW-301
Переглядів 143Рік тому
Processing excessive secondary sludge from distillery production. Setup with cake pump Seepex BTVE for solid cake pumping with multiple dump poitns for even filling of cake dumpster.
MP-DW-201 meat processing plant dewatering
Переглядів 323Рік тому
Mixed primary (DAF) secondary sludge from meat processing facility on MP-DW-201 screw press, installed in insulated container on site.
Direct sludge dewatering from nitrification (municipal WWTP)
Переглядів 55Рік тому
Direct dewatering of sludge from nitrification tank with screw press. No sludge tank nor stabilization equipped on this plant. Flow 10 m3/h with inlet TSS 0.47%. Using polymer 0.3% concentration at 350 l/h.
Dewatering excessive sludge on municipal waste water plant - MP-DW-302
Переглядів 161Рік тому
Processing 7.8 m3/h @ 1.70% inlet TSS (133 kg DS/h) on MP-DW-302. Polymer consumption 620 l/h of 0.3% concentration (14 g of product/1 kg DS).
Wood processing facility sludge dewatering
Переглядів 144Рік тому
Secondary sludge from aerobic biological treatment planet from wood processing factory. Running 0.8-1 m3/h sludge on MIVALT MP-DW-201.
MIVALT MP-DW-201 screw press dewatering of municipal sludge
Переглядів 1,1 тис.Рік тому
Processing 1.8 m3/h of 2% excessive sludge from municipal waste water plant with 150 l/h of 0.2% cationic polymer on MP-DW-201.
Dewatering sewing threads sludge - chemical
Переглядів 3082 роки тому
Dewatering of sludge coming from chemical waste water system plant of sewing threads manufacturing facility. MP-DW-201 screw press, processing 1 m3/h @ 2% inlet sludge density.
Dewatering anaeroically stabilized from municipal waste-water plant
Переглядів 1872 роки тому
Dewatering anaerobically stabilized sludge - mesophilic stabilization with biogas production. Running 1.7-2.2 m3/h at MP-DW-201 screw press.
301 - dewatering municipal sludge
Переглядів 1752 роки тому
Processing 4.5 m3/h of aerobically stabilized municipal sludge on MP-DW-301 with belt conveyor and automatic polymer station.
Dewatering municipal sludge MP-DW-201
Переглядів 1212 роки тому
Dewatering excessive sludge from municipal waste-water treatment plan with MP-DW-201 screw press. Performing 1.2 m3/h of 2% inlet sludge TSS.
Dewatering sludge - poultry processing plant
Переглядів 1322 роки тому
Dewatering sludge - poultry processing plant
Dewatering membrane sludge - MP-DW-201
Переглядів 9753 роки тому
Dewatering membrane sludge - MP-DW-201
Dewatering screw press - municipal sludge WWTP 301
Переглядів 2,8 тис.3 роки тому
Dewatering screw press - municipal sludge WWTP 301
Dewatering screw press - municipal WWTP
Переглядів 1663 роки тому
Dewatering screw press - municipal WWTP
Dewatering screw press - meat processing plant
Переглядів 4503 роки тому
Dewatering screw press - meat processing plant
MP-DW-403 municipal biosolids processing
Переглядів 3133 роки тому
MP-DW-403 municipal biosolids processing
Dewatering DAF sludge MP-DW-301 - poultry slaughterhouse
Переглядів 7313 роки тому
Dewatering DAF sludge MP-DW-301 - poultry slaughterhouse
MP-DW dewatering biosolids municipal sludge
Переглядів 6063 роки тому
MP-DW dewatering biosolids municipal sludge
What's the capacity of this kind of press? I mean, how many kg of sludge can it dewater per day?
And what kinf of polymer do you use?
Up to about 20 tons of dry solids/day for biggest model. That would be around 1000 m3/day for typical 2% TSS sludge.
@@Mateo-q5h Polymer selection is very sludge dependent, but most typically would use high-charge cationic acrylamid polymer with net structure in emulsion forms, as these produce durable flocks, which don't shear easily and provide very effective water drain rate.
ΤΕΛΕΙΟ ΙΙΙ ΕΝΑ ΤΕΤΟΙΟ ΜΕΓΑΛΟ ΣΕ ΜΗΚΟΣ ΚΑΙ ΣΕ ΔΙΑΜΕΤΡΟ ΜΗΧΑΝΗΜΑ ΚΑΝΕΙ ΚΑΙ ΓΙΑ ΕΙΕΣ ΟΠΩΣ ΤΟ ΕΚΤΙΜΩ ΓΙΑΤΙ ΔΕΝ ΤΑ ΠΡΟΩΘΕΙΤΕ ΣΤΗΝ ΕΛΛΑΔΑ ΠΟΥ ΥΠΑΡΧΕΙ ΖΗΤΗΣΗ ΚΟΙΤΑΞΤΕ ΤΙ ΕΧΩ ΚΑΝΕΙ ΕΓΩ ΓΙΑ ΤΙΣ ΕΛΙΕΣ ANTHIS ATHANASIOS MINI FACTORY OLIVE F B
How can I unblock the machine when residues remain in the screw?
Contact me please on tomas.mivalt@mivalt.eu
Hi
Hi
hello, do you have any questions, we could help with ?
How much does cost your machine
Do not hesitate to contact us on miroslav.skalicky@mivalt.eu for more information and pricing.
Then water coming topside how to fixed
Best product
After dewatering the sludge, does it need to sun dry again? Or, ready for incineration operation? Please reply.
It depends what dryness you need and what you plan to do with cake. For composting, dryness of cake is typically suitable. Sun drying or any different type of drying can be used for removing intersticial and bond water (thus increasing final dryness of cake), which is trapped in the bacterias/cells and other organic compounds in the sludge, which can't be removed by any mechanical ways.
pressin' poo.
Hello I want Consultation IF YOu HAVE
Hello, Send me your query please to tomas@mivalt.eu , thank you!
Slughe prifaired the chemicals plese reply
What material and tonnage are you pushing?
Various types of sludge, mostly organic origin (municipalities, food industry, grease traps, brewery, winery ..) with throughtput from 10 kg dry solids/h up to about 1000 kg DS/h. Visit our website www.mivalt.eu for more information. Thank you.
ΔΟΥΛΕΥΕΙ ΣΕ ΑΠΟΒΛΗΤΑ ΕΛΑΙΟΥΡΓΕΙΟΥ?ΚΑΙ ΠΟΣΟ ΚΟΣΤΙΖΕΙ
Yes, machine works well for oil-based sludges. You can contact us on mivalt@mivalt.eu for more details.
It's dosing chemical or water
flocculant (polymer)
Cost pl
You can contact us at mivalt@mivalt.eu for more information.
Follow Us (Like, Share, Subscribe) : ua-cam.com/video/LbHjQyaObXE/v-deo.html Racors has grown and delivering good quality dewatering pumps and after sales services its range of dewatering services to include high pressure pumps and associated equipment. We are suppliers of dewatering pumps in oil and gas industry, Mining industry, chemical Industry, Flood clearing , Construction and dewatering companies globally like Middle East & African countries in Dubai, Abu Dhabi, Oman, Bahrain and Qatar, saudi , nigeria, uganda etc... Any enquiry contact Us : www.racors.in
Sir adres please send
Contact us please on mivalt@mivalt.eu
RPM?
Call me required as urgent basis 8728993489
Dear Shahzad Naiyar, please send us e-mail to sales@mivalt.eu. We will negotiate further details. Thank you.
👍🏻, which polymer you used?
quelle type de polymère vous avez utilisé ?
Ooolleee quiieenn saaabeeee
Sludge cake whit 82% moisture, that's the biggest problem when the companies buying copycats, this kind of equipment has the worst quality and poor design, it's better the original Volute from Amcon Japan. In Mexico we have bad experiences with this copies, because the price is very cheap and the support it's like this kind of shit.
Dear Amcon distributor, 15 to 20% sludge cake from activation tank of WWT is standart result and Volute is not any better. For different sludges we can get different dry matter (max is around 45% for oil-based sludges) and you can check other videos to see it. Sadly, shitting around is only thing, you guys know to do. You know the best, that Volute is overpriced and outdated equipment, which can last just half year before you have to call your dealer to sell you new shaft. We don't go this way, we try to do our best to have satisfied customer with reliable equipment. And plenty of satisfied customers all over the globe proves that. Have a nice day!
MIVALT s.r.o. Dear MIVALT distributor, I sell my first unit in Mexico 5 years algo, and I never sell any spare part, and i have the record an all the equipments works, so when you say the Volute needs to replace every 6 months, maybe the client buying this equipment or benenv or any copycat in the market. Maybe your company do the best effort to sell equipments but let me tell you, I prefer sell god quality to the customers, to sell problems just for money. In this case, I don’t think the Volute has a bad or outdated technology, because all the brands in the market started to sell this technology, please do not try to cheat customers whit stolen technology and poor quality. I wish you the best, however there is no future for those who try to progress stealing merits from another company. Best regards.
@@benjaminrobles9049 good comments, what would you recommend?
Yukle Tez un this case, we can offer the best solution and warranty for your process, if you have interest to know what we do in dewatering solutions, please contac me! benjamin.robles@tecproambiental.com we sell real solutions whit 4 years of warranty, also, our products are 100% Japanese brand and we have the best support vs the copycat, maybe their prices are very cheap and ridiculous but if you has problems whit the machine the Chinese company never will support you, they only said... demand me if you want, I has this problems in Mexico and many companies contac me to fixed this equipments, unfortunately we can do nothing for them because this equipments don’t has the same specifications like the originals. Best regards!
We need to contact you, Sir.
máy này bán ở đâu ? giá bao nhiêu tiên a?
Jala Watts: Indeed, bigger inflow and suitable polymer. That was main reason of problems in this testing. Those are raw videos from tests. However for example, how dry material on output can be, you can take a look on ua-cam.com/video/xooZL1pWBj4/v-deo.html
you need more pressure on the manure coming out. it should be dry manure, not clumpy wet !!!